120 Cores Waterproof Mini Dome Type Fiber Optic Cable Joint Enclosure PLC Splitter Vertical Closure

Basic Info

Product Description

Overview

the mini closure is suit for branch splice.aerial mounting, hand hole should be available . meanwhile it suitable for direct buried application. The whole housing and base are made from PP material, which resistant to the oldage from the weather change. It is anti-fire ,waterproof. It protect the fiber avoid to tensile, impact... it is mechanical protection of the splice

Dimension and capacity

Mechanical and environmental Requirements
The standard testing method for optical fiber closure shall be IEC, EIA or JIS etc., and parameters concerned in the following. Bending Flexure), Compression (Crush), Cable Retention, Impact, Torsion, Vibration, Water Immersion, Ultraviolet Radiation (UV Resistance), temperature Cycling, Fungus Resistance, Chemical Resistance, re-entry test.

Dimension and capacityOutside dimension (Length * Width*Height) 210mm*150mm*30mmNumber of inlet/out ports 4 ports :2 in 2 outDiameter of fiber cable : Φ8mm~Φ18mmMax. Capacity of FOSC :MAX 12F

Drop wire closure;fiber optic joint closure;fiber optic splice closure

Accessories

wrench, tape, clearance paper, heat shrink protective sleeve , nylon tie, hook and manual ect

Feature

Purpose: Aerial, direct-burying, wall-mounting, Pipeline laying way
Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
Span-life:30 year

Application:

1.Be suitable for Aerial,Duct and Direct Buried application.

2.CATV environment, Telecommunications, Customer premises environments, Carrier Networks and fiber optic networks.

Product Specifications